PVC profile
Technoplast offers furniture profiles. As facing material it is useful not only for furniture factories employing industrial equipment, but also for small shops using hand tools.
- Two types of profile are available: ?-shaped and C-shaped. T-shaped profile requires notching along the edge of the surface to be faced; C-shaped profile is attached with adhesive.
- Furniture profile base is 3-mm thick; therefore edges of structural elements are safely protected against mechanical damage.
- Lugs are 2-mm long; therefore the area of molding can cover small chips unintentionally produced during material cutting.
- On customer request, profile facings can be embossed to simulate wood grain.
- When bent by 90 degrees and more, paint coating shows no cracking and the bent area does not turn white.
- Base colour perfectly matches the colour of the face surface.
- Dyes used for manufacturing have the six degree ultraviolet resistance, i.e. the profile does not fade or change colour.
- Since August 2007, TECHNOPLAST has put furniture molding in the same range of colours as PVC edge banding on the Russian market.
- TECHNOPLAST furniture molding specifications meet all international quality standards
- Molding base colour perfectly matches its surface colour.
- Molding is packed in five-ply corrugated board boxes. Each roll is packed in a separate box.?-01 - 100-m roll; ?-02 - 100-m roll; ?-03 - 50-m roll, variation limit is +/- 0.2 mm.
5703T maple
|
- PVC profile is packed in 5-ply corrugated board
- Each roll is packed in a separate box. P-01 - 100-m roll; P-02 - 100-m roll; P-03 - 50-m roll; Rolls are separated into 4 parts of 25 m each by a cardboard partition.
- TECHNOPLAST has managed to offer PVC edge banding materials at relatively low prices and at the same time to guarantee integrity of their chemical composition (PVC pellets - 95%, modifiers - 5%).
- A month's stock of edge banding in St. Petersburg and Moscow is 3 million linear meters.
- The following standard sizes are available: 0.5mm *19mm, 1.0mm *19mm, 2.0mm *19mm, 0.5mm *26m, 2mm *26mm, 2.0mm *30mm, 2.0mm *36mm. 0.5mm *19mm edge banding strip, as well as 2.0mm *19mm edge banding strip are made by extruding method, therefore the edge banding products of different thicknesses have the same colours.
- Edge banding strips of any size and colour are available on request.
4279T rustic oak
4286T light oak
4647T alder
4835T wenge walnut
4842T light walnut
4853T dark walnut
4892T Italian walnut
4966T Calvados pear
4967T dark pear
4971T Oxford cherry
5111T Bavaria beech
5126T dark beech
5132T light beech
5151T medium beech
5633T walnut
5638T mahogany
